Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Fort Wayne Homeowners
A chimney that hasn’t been looked at in years is a closed book, and Fort Wayne homeowners know the feeling: a fireplace that drafts poorly, a faint smell on humid days, a stain on the ceiling that wasn’t there last winter. Chimney inspection is the one service that turns guesswork into answers. We inspect it, clean it, and fix what we find – same crew, same visit window. Our technicians have up to experience, and every job starts with camera evidence you can watch on a screen, not a sales pitch. Whether you’re in an older masonry home near the Maumee or a newer build with a gas insert, an inspection tells you exactly what condition your flue is in before the burning season starts. Same-day appointments are often available in Fort Wayne when you call early. Call (866) 589-6152 to book your inspection. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Fireplace Inspection
Fireplace Inspection is a focused look at the firebox, damper, smoke chamber, and the first stretch of flue that a wood-burning or gas fireplace uses every time it’s lit. You need one before the first fire of the season, after any change to the fireplace (a new insert, a damper repair, a remodel), and anytime smoke backs into the room. At Fort Wayne Chimney Sweep, we inspect the firebox for cracked brick and loose mortar, check the damper opens and seals, and look at the smoke shelf for the creosote that builds up out of sight. We do the inspection and any repair that follows, so you aren’t handed off to a second contractor. A fireplace inspection typically runs $150-$300 in Fort Wayne, and the written estimate sets the final price.
What We Check in the Firebox
We examine firebrick joints for cracks that let heat reach the surrounding masonry, and check the damper for a tight seal when closed. These are the two spots where a small problem can quietly damage the whole chimney over a season. Any crack we find gets photographed and shown to you before we recommend a repair.
Gas Insert and Damper Checks
Gas inserts change what an inspection looks at: the venting, the glass, and the refractory panels matter more than creosote. We check that the venting is clear and properly connected and that the damper is either removed or secured open, as inserts require. If something needs attention, you’ll see the evidence on camera.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services cover the whole flue system from the firebox up to the cap, and they’re what you book when you want a straight answer about whether your chimney is safe to use. We offer them for wood-burning fireplaces, gas appliances, and older masonry chimneys across Fort Wayne, and we tailor the level of inspection to what you’re actually worried about. A basic visual inspection checks what’s reachable from the firebox and roof; when a problem is suspected, we go further with a camera. Every inspection ends with a plain-language report and photos, and if we find a liner problem we can resurface or reline it ourselves – no referral runaround. Inspection services typically run $150-$450 depending on the level and what needs checking. The written estimate sets the final price, and nothing gets recommended without evidence you can see.
Choosing the Right Inspection Level
A basic inspection fits an annual routine when nothing seems wrong. If you’ve had a chimney fire, a leak, a remodel, or a new appliance installed, a higher level is the right call. We’ll talk through what you’re experiencing and recommend the level that answers it without upselling.

What the Written Report Covers
You get photos of the cracks, gaps, and buildup we found, plus a clear note on what needs repair now and what can wait. That second part matters: not every flaw is urgent, and we say so plainly. You’ll know what’s safe to use this season and what should be scheduled.

Chimney Flue Inspection
Chimney Flue Inspection is the part of the job that looks inside the flue itself, the vertical channel that carries smoke and gases out of your home. It matters most in older Fort Wayne homes, where clay tile liners have had decades of heat cycles, and after a chimney fire or a change in appliance. We run a camera the length of the flue to check tile joints, look for gaps and offsets, and confirm the flue is clear of nests, debris, and heavy creosote glaze. If the liner is cracked or deteriorated, we can resurface it with HeatShield or install a new liner with DuraFlex – both done by us. A dedicated flue inspection typically runs $200-$450 depending on access and what we find. The written estimate sets the final price.
Tile Joints and Gaps
Clay tile liners are laid in sections, and the joints between them can open as the chimney heats and cools over the years. A gap lets heat and gases reach the masonry around the flue, which is where trouble starts. We document every joint that’s opened and tell you whether it needs attention now.
When Resurfacing Beats Relining
If the tile is sound but the joints have gaps, HeatShield resurfacing can restore the liner without tearing it out. When the tile itself is cracked or broken, DuraFlex relining is the more durable fix. We’ll show you which one fits your chimney and why.
Chimney Fire
Chimney Fire is the hazard that builds up quietly: creosote deposits left by regular burning ignite inside the flue, and the fire can damage the liner and masonry without anyone seeing flames from the house. You need an inspection after any chimney fire, even a small one you put out yourself, because the visible damage is often inside the flue. We inspect the full flue for heat damage, cracked tile, warped dampers, and creosote that survived the fire, then repair what we find. If the liner is compromised, we resurface with HeatShield or reline with DuraFlex as part of the same job. Post-fire inspections typically run $250-$450 in Fort Wayne, and the written estimate sets the final price. Prompt inspection after a fire is the difference between a repaired chimney and a rebuilt one.
Signs You May Have Had One
A loud roaring or popping sound from the chimney, a sudden dense smoke smell, or blackened creosote that looks puffy rather than flat can all point to a fire. If the damper or cap looks warped, that’s another sign. Don’t light another fire until someone has looked at the flue.
Why the Flue Must Be Rechecked
A fire can leave the tile looking intact from the firebox while cracks run through it further up. Only a camera inspection shows the full length. We check the entire run before telling you the chimney is safe to use again.
Level 2 Chimney Inspection
Level 2 Chimney Inspection is a full inspection that reaches every accessible part of the chimney, including the flue by camera, and it’s required whenever a property changes hands or an appliance changes. You need one after a chimney fire, after relining, when switching fuels or installing a new insert, and before buying or selling a home in Fort Wayne. We inspect the firebox, flue, smoke chamber, crown, cap, flashing, and exterior masonry, then document what we find with photos. It’s the most complete picture you can get short of dismantling the chimney. A Level 2 inspection typically runs $300-$450 depending on access and roof height, and the written estimate sets the final price. If repairs are needed, we handle them in the same service cycle.
When It’s Required
Most property transfers and appliance changes call for a Level 2, and it’s the standard recommendation after any fire or liner work. Even without a trigger event, it’s the right choice when the chimney’s history is unknown. We’ll tell you honestly which level fits your situation.
Exterior and Roof Components
We check the crown for cracks, the flashing for gaps, the cap for rust or blockage, and the masonry for spalling. These are where most chimney leaks start. Documenting them now prevents a bigger repair next spring.
Chimney Leak
Chimney Leak is water getting in where the chimney meets the roof, past the crown, or through cracks in the masonry, and it’s one of the most common reasons people call us in Fort Wayne. You need attention when you see ceiling stains, rust on the damper, a musty smell in the firebox, or white powder on the brick. Water and masonry don’t mix: freeze-thaw cycles break down brick and mortar, and a small leak becomes structural over time. We inspect the crown, flashing, cap, and masonry to find the actual entry point, then repair it – no guesswork and no paint-and-pray fixes. Leak diagnosis and repair typically runs $250-$600 depending on what’s involved, and the written estimate sets the final price. Left alone, a leak gets more expensive every season.
Flashing and Crown Problems
Flashing is the metal where the chimney passes through the roof, and it’s the most frequent leak source. A cracked crown lets water sit against the masonry and work its way down. Both are fixable, but only once the real entry point is found.
Rust and Efflorescence
Rust on a damper or firebox parts and white efflorescence on the brick are both signs water is getting in somewhere. They show up before a ceiling stain does. If you see either, an inspection finds the source before the damage spreads.
Chimney Camera Inspection
Chimney Camera Inspection is what makes the rest of the inspection trustworthy: a video camera run the full length of the flue so you see exactly what we see. You need it whenever a liner problem is suspected, after a fire or a leak, and during any Level 2 inspection. At Fort Wayne Chimney Sweep, we show the footage on a screen so you can watch the camera pass the tile joints and see any cracks for yourself. There’s no “trust me, you need a new liner” moment – either the camera shows the problem or it doesn’t. A camera inspection typically runs $200-$400 in Fort Wayne, and the written estimate sets the final price. If we do find a problem, we can fix it with HeatShield resurfacing or DuraFlex relining, and that’s decided from the footage, not from a sales estimate.
What the Camera Shows
The camera reveals cracked tile, open joints, offsets, heavy glaze, and blockages that a visual check from the firebox can’t reach. It also confirms a flue is clean after sweeping. This is the record we base repairs on.
Watching Along With Us
We’ll walk you through the footage as it plays and point out anything worth noting. If there’s nothing to fix, you’ll hear that too. Nothing is recommended without camera evidence you can review for yourself.
Brands We Service
We work with DuraFlex liner systems and know where they wear over time – the connections and the top plate are where most liner installations need attention. HeatShield is the other side of our liner work: a ceramic resurfacing method for flues where the tile is sound but the joints need restoration, and it’s a repair many sweep-only competitors don’t offer.
We also work with Olympia Chimney components and HeatShield backing materials, and with Famco and Copperfield parts where they fit the job. Working with several professional-grade lines means the repair is matched to the chimney rather than forced onto whatever one supplier makes. Whether you have DuraFlex, Olympia Chimney, HeatShield-backed tile, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- A strong creosote smell in warm weather. That smell is creosote glazing up out of sight, and it’s a fire risk once it thickens. An inspection finds it before the next fire does.
- Smoke backing into the room. Backdraft usually means a blockage, a damaged flue, or a pressure problem, and it won’t fix itself. Have it looked at before you burn again.
- Water stains on the ceiling or chimney chase. A stain means the leak has been active long enough to travel. The sooner the entry point is found, the less masonry it damages.
- Visible cracks in the firebox or loose mortar. Heat can reach the surrounding structure through those cracks. Don’t use the fireplace until the firebox is checked.
- A roaring chimney or warped cap after a fire. Any suspected chimney fire deserves a full camera inspection. The liner may be cracked even if you don’t see it.
Our Process, Step by Step
- 1
Phone consultation and booking. We ask what your fireplace or appliance is, what you’ve noticed, and when you last had it inspected. That tells us which level of inspection fits and what we’ll need on the visit. Call (866) 589-6152 to book.
- 2
On-site inspection. We inspect the firebox, smoke chamber, damper, flue, crown, cap, and flashing. A camera runs the full length of the flue so every joint and offset is visible.
- 3
Sweeping if needed. If creosote or debris blocks the view or builds up in the flue, we sweep it before inspecting further. You get an accurate read on the liner instead of a camera view filtered through soot.
- 4
Photo report and plain-language findings. You see the footage and photos, and we tell you what needs repair now, what can wait, and what’s safe to use this season. Nothing is recommended without evidence.
- 5
Repair, if needed. If there are liner or masonry problems, we handle the fix ourselves – HeatShield resurfacing, DuraFlex relining, or masonry repair – under one written estimate. No handoff to a second contractor.
How Much Does Chimney Inspection Cost in Fort Wayne?
Chimney inspection costs in Fort Wayne typically run $150-$300 for a basic visual inspection and $300-$450 for a Level 2 inspection with camera access to the full flue. If your chimney needs sweeping before it can be inspected properly, that’s usually $150-$250 depending on creosote buildup and accessibility. A post-fire or leak-specific inspection with camera documentation typically lands in the $250-$450 range. These are estimates for common scenarios – the written estimate sets the final price once we’ve seen your chimney.
What moves the price: the level of inspection, roof access and height, whether a sweep is needed first, and how much documentation the job requires (a property-transfer inspection needs more than a routine annual check). How to avoid overpaying: ask whether the price includes a camera view of the full flue, and whether the inspection and any repair are done by the same company. A cheap inspection that stops at the firebox often leads to a second paid visit from a different contractor – that’s the expensive path. Our estimate is free, and the inspection price includes a photo report you keep. Call (866) 589-6152 for an exact quote – estimates are free.
Our Service Area Near Fort Wayne
We serve Fort Wayne and the surrounding communities, including New Haven, Huntertown, Leo-Cedarville, Ossian, Columbia City, Garrett, Auburn, Decatur, Huntington, and Bluffton. Drive times affect when we can reach you, and we’ll tell you the earliest available window when you call. Fort Wayne homeowners typically get the shortest wait. Schedule your inspection at Fort Wayne and we’ll book the next opening that fits your address.
Serving Fort Wayne, IN – Our Local Coverage Area
We serve Fort Wayne and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Fort Wayne
A chimney inspection is a professional evaluation of the firebox, flue, smoke chamber, crown, cap, and exterior masonry to confirm the chimney is safe and sound. It checks for creosote buildup, cracked tile, gaps, water damage, and blockages, and it ends with a report. At Fort Wayne Chimney Sweep, the inspection includes camera footage you can watch. Call (866) 589-6152 for an exact quote – estimates are free.
A basic inspection usually takes about 30-60 minutes, and a Level 2 with camera work runs 60-90 minutes depending on roof access and how much documentation is involved. If a sweep is needed first, add another 30-45 minutes. We’ll give you an accurate time estimate when you book. Call (866) 589-6152 for an exact quote – estimates are free.
Chimney inspections in Fort Wayne typically cost $150-$300 for a basic visual check and $300-$450 for a Level 2 inspection with full camera access. Sweeping, if needed first, is usually $150-$250. The written estimate sets the final price. Call (866) 589-6152 for an exact quote – estimates are free.
Yes, we work with DuraFlex liner systems and Olympia Chimney components, along with HeatShield resurfacing, Famco, and Copperfield. If a liner repair is needed, we do it ourselves rather than referring you out. That means one estimate for the inspection and any repair that follows. Call (866) 589-6152 for an exact quote – estimates are free.
Same-day service is often possible when you call in the morning. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (866) 589-6152 to check today’s availability.
Each estimate states the terms for that job, and we’re glad to walk through them before any repair starts. We don’t publish a standard warranty figure because the terms vary by the work involved. Ask us about it when you book, and you’ll have it in writing. Call (866) 589-6152 for an exact quote – estimates are free.
Clear the area around the fireplace and make sure we can reach the roof or the chimney cleanout. Don’t light a fire for at least 24 hours before the visit so the flue is cool and safe to inspect. Move any fragile items away from the hearth. Call (866) 589-6152 if you’re unsure what we’ll need on the day.
Schedule Your Chimney Inspection Service in Fort Wayne Today
If it’s been more than a year since anyone looked inside your chimney, book the inspection now, before the burning season starts. We inspect it, clean it, and fix what we find – same crew, same visit window. Our technicians have up to experience, and everything starts with a free, no-obligation estimate. Call (866) 589-6152. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Fort Wayne Chimney Sweep.