Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Huntington, IN
We provide independent DuraFlex service across Huntington, and the one thing that makes our DuraFlex work here different is this: we know what these liners do inside the city’s old coal-era brick chimneys once they sit through a decade of freeze-thaw winters. DuraFlex is a flexible stainless steel chimney liner, and it’s a sound product. How it’s sized, sealed, and supported inside a Huntington flue is what decides whether it lasts. Our technicians have up to experience, we’re an independent shop (not affiliated with or authorized by DuraFlex), and we handle the Level 2 inspection, creosote removal, and cap replacement that keep a liner working. Call (866) 589-6152 for a free estimate.
Why Huntington Residents Choose Us for DuraFlex Service
Huntington homes heat with wood hard from November through March, and that means DuraFlex liners here get exercised in a way milder climates never see. We work on these systems every week. We know the component quirks – the top plate that weeps after a hard thaw, the support bracket that lets go when the surrounding mortar spalls, the liner that was sized right for the stove but sits in a cavity four times too big.
That’s the difference between a sweep who can clean a flue and a shop that can service the liner itself. We trained on six professional chimney product lines – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – because no two chimneys need the same fix. When we find a crushed section or a rusted outer wrap, we’re not handing you off to a second contractor. We inspect it, clean it, and fix what we find, as one job with one point of accountability.
We schedule sweeps and inspections across Huntington by appointment. The estimate is free, the flat price is agreed before we book, and a camera inspection with a photo report comes with the visit. Call (866) 589-6152. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Huntington
These are the failures we run into most on DuraFlex systems in Huntington, and most of them trace back to the same two culprits: oversized old flues and a climate that freezes and thaws all winter.
- Crushed or kinked liner sections. When a DuraFlex 316L liner goes into an unlined brick chimney whose original clay tile is rough or offset, it can be forced into a kink. That kink later restricts sweeping and traps creosote. In Huntington’s older chimneys, where the tile work was never smooth to begin with, this shows up often.
- Cracked silicone at the top plate and cap. Freeze-thaw cycles here crack the seal around DuraFlex terminations. Meltwater runs down the liner’s exterior and rusts the outer wrap. A cap that looked fine in October can be leaking by February.
- Glazed creosote in an undersized liner. In oversized coal-era flues converted to wood stoves, a slightly undersized DuraFlex liner runs cooler than it should. Creosote glazes on the liner wall faster than it would in a properly sized modern flue, and glazed creosote is hard to sweep off.
- A loosened bottom support bracket. Older DuraFlex installations often hang on a bottom support bracket that loosens as mortar joints in the surrounding brick spall. An unsecured liner moves during cleaning, and movement is how liners crack.
- Cold-air infiltration around the top plate. A recurring finding in Huntington’s courthouse-square blocks: an original coal flue is far larger than the liner, and cold air leaks around the top plate, hurting draft and cooling the whole system.
DuraFlex Service in Huntington: What Local Conditions Mean for Your Equipment
The courthouse-square blocks downtown are dense with late-1800s single-wythe brick chimneys that started as coal flues and were later fitted with DuraFlex liners. Here’s what that history does to a liner. Those original flues are often far too large for a modern wood stove – so a liner that’s correctly sized for the stove still sits inside an oversized cavity, with cold air leaking around the top plate every winter. That’s a Huntington-specific finding, and it explains a lot of the weak draft and rapid creosote buildup we get called about in those blocks.
Huntington’s cold winters put these chimneys in heavy use from November through March, and freeze-thaw cycles crack mortar and spall brick. Original single-wythe chimneys that may never have been relined, some converted from coal to wood heat, feel that hardest. Liner integrity isn’t optional here – it’s the difference between a working fireplace and a fire hazard. In a typical Huntington call, a homeowner with a wood stove insert in a late-19th-century brick chimney notices weak draft and more frequent creosote. A Level 2 inspection often reveals a crushed section near the offset and glazed creosote on the liner wall. A qualified local pro would sweep the liner, document the crushed section, and recommend either a properly sized replacement liner or a top-plate and cap upgrade to stop the infiltration and restore draft.
DuraFlex Models & Products We Service in Huntington
We service the DuraFlex liner systems installed across Huntington, including DuraFlex Pro 316L, DuraFlex Pro 304L, DuraFlex Pro Flex, and DuraFlex ValuFlex. What matters on any of them is sizing and fitting: a liner has to match the appliance, clear the flue’s offsets, and terminate with a cap and top plate that seal tight. We use DuraFlex OEM replacement components for load-bearing and joint-critical parts – top plates, support brackets, cap assemblies – because aftermarket clones often run thinner stainless and don’t match the profile. For cleanup and inspection we bring camera equipment and a photo report, so you can see what we see before anything is recommended.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Huntington
DuraFlex chimney cleaning in Huntington typically runs $180 to $340, and a Level 2 inspection generally falls in the $250 to $450 range. Cap replacement adds roughly $95 to $250 depending on the cap and termination. If the liner itself needs replacing, that’s a larger project and priced on its own after the inspection.
What drives the cost: how accessible the flue is, how much creosote has built up (glazed creosote takes longer than flaky), whether the cap and top plate need work, and whether a camera inspection is part of the visit. Every estimate is free and written. The flat price is agreed before we book, and the written estimate sets the final price. Nothing is recommended without camera evidence you can see for yourself, and if the work can safely wait until spring, we’ll tell you so. Call (866) 589-6152 for your Huntington estimate.
Serving Huntington, IN – Our Local Coverage Area
We serve Huntington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Huntington
A Level 2 inspection is a full camera inspection of the flue, and it’s what tells us whether a DuraFlex liner will actually fit and work in your chimney. We look at the interior condition, measure the flue against the appliance, check for offsets and rough tile that could kink a liner, and photograph any deteriorated mortar or creosote. You get the photo report and a written estimate. Call (866) 589-6152 to book one.
A loose cap after winter is usually a freeze-thaw problem, not a DuraFlex problem. The silicone seal at the termination cracks, the cap shifts, and meltwater gets in behind it. It’s common here because our winters cycle freeze and thaw repeatedly. We reseal and re-secure the cap, or replace it if the profile is compromised. Call (866) 589-6152 and we’ll take a look.
Once a year, before the burn season starts, is the baseline for a DuraFlex liner in a Huntington home that heats with wood all winter. If your liner runs undersized for the flue or you’ve seen glazed creosote before, we’ll recommend checking it more often. A Level 2 inspection tells you exactly what’s built up on the liner wall. Call (866) 589-6152 to schedule the sweep before the season.
Usually, yes. Spalling brick around the top plate is a masonry failure, not a liner failure, and if the liner is structurally sound it can stay. We’d repoint and reseal the area, then re-secure the top plate so water and cold air stop getting in. If the camera shows crushed sections or widespread rust-through on the liner, replacement is the honest call. Call (866) 589-6152 and we’ll inspect before recommending either.
Yes, sizing matters even more after a coal-to-wood conversion, because the original coal flue is oversized for a wood stove. A liner properly sized for the stove still sits in a cavity that’s much too big, which cools the system and speeds up creosote. We measure the appliance and the flue and recommend a liner sized to the stove, plus a sealed top plate to stop cold-air infiltration. Call (866) 589-6152 for a free estimate.
Service Areas Near Huntington
We also service DuraFlex systems in Ossian and Columbia City, along with Fort Wayne, New Haven, Huntertown, and Leo-Cedarville. If your chimney sits anywhere in that spread and runs a DuraFlex liner, we can handle the sweep, inspection, and repair in one visit window.
Book Your DuraFlex Service in Huntington Today
Whether your DuraFlex liner needs a sweep before burn season, a Level 2 inspection after a rough winter, or a cap replacement that stops the leak, we’ll inspect it, clean it, and fix what we find. The estimate is free and the flat price is set in writing before we book. Call (866) 589-6152. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Fort Wayne Chimney Sweep.