Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Huntington, IN
We provide independent HeatShield service across Huntington, and the difference here is what we find inside the chimneys: many were built for coal and were never lined with clay tile. HeatShield is a castable refractory lining poured in place to restore that kind of flue. Our technicians have up to experience working to HeatShield’s published installation specs. Call (866) 589-6152. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the price is set per job by the written estimate.
Why Huntington Residents Choose Us for HeatShield Service
Huntington homeowners call us because the work that comes out of a flue inspection here is rarely just sweeping. It’s a torch test on original brick, a camera run down a flue that has never had a liner, and a straight answer about what can be cleaned and what has to be poured. That’s what HeatShield capability means in practice. Resurfacing and liner restoration are part of the same visit as the sweep, not a hand-off to a second contractor.
We schedule by phone and confirm the window before we book. The estimate is free, the price is set per job by the written estimate, and nothing gets recommended until you’ve seen the camera evidence for yourself. If your chimney can safely wait a season, we’ll say so. Our technicians have up to experience on flue systems, and that’s all we work on.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Solve in Huntington
These are the failure modes we run into on HeatShield liners and HeatShield candidates around Huntington, each tied to something local:
- Cracking and separation of the ceramic surface. Where an unlined single-wythe brick chimney has gone through Huntington freeze-thaw cycles without a cap or crown protecting it, water gets into the brick and the liner face can crack and separate. A crown and cap correction usually has to come before the resurfacing does.
- Liner deterioration at the smoke chamber transition. Many Huntington chimneys were converted from coal to wood heat, and the original mortar at that transition was never rated for sustained wood temperatures. The camera finds it before the draft does.
- Spalling brick and failing mortar joints behind the liner. Hidden until a Level 2 inspection with a camera shows the outer wythe loosening. This is the one that decides repair versus reline.
- Creosote accumulation and glazing on an inadequately insulated or improperly cured HeatShield surface. Cold winters and low burn rates on an oversized flue will glaze creosote fast, and a glazed liner needs a proper chemical sweep, not a wire brush.
- A liner that never fit the appliance. HeatShield poured for a coal furnace doesn’t match a modern wood stove’s venting needs, and an oversized flue runs cool. We resize it rather than talk you into a full reline you don’t need.
HeatShield Service in Huntington: What Local Conditions Mean for Your Equipment
Walk the blocks around the downtown courthouse square and you’re looking at late-19th and early-20th century houses, many with original brick chimneys that were vented for coal furnaces. Those flues are larger than a modern wood appliance needs. An oversized flue that a wood stove can’t keep warm is exactly where creosote builds fastest, which is why a stove in this part of Huntington creosotes up quicker than the same stove in a correctly sized flue. HeatShield’s cast-in-place lining changes that geometry. A liner poured to the size of the appliance keeps flue gas hot to the top, cuts creosote formation, and closes the gap between what the chimney was built for and what it’s being asked to do now. For unlined brick, it’s a right-sizing fix, not a cosmetic upgrade. Huntington’s cold winters make it the difference between a chimney that works and one that fires.
HeatShield Models & Products We Service in Huntington
We service the HeatShield Cerfractory Flue Sealant, which is the cast-in-place insulating liner for unlined masonry flues. We also work with the HeatShield Resurfacing System for cracked or spalled clay tile liners, and poured refractory liners sized for wood stove and insert venting in oversized flues. Lining work uses genuine HeatShield Cerfractory mix and the specified reinforcing mesh. Off-brand castable refractory often cures brittle and cracks at the first heating season, so we don’t use it. On caps, dampers and top plates, quality aftermarket components are fine where fit and material are equivalent. We’re an independent HeatShield service provider, not affiliated with or authorized by the manufacturer.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Huntington
What you’ll pay for HeatShield work in Huntington is set per job by the written estimate. The variables are the flue’s condition, the length and diameter of the pour, and whether crown and cap work has to come first to stop water getting in. Here’s how the estimates typically break down:
| Work | Typical estimated range |
|---|---|
| Level 2 inspection with camera, creosote removal | $180 to $340 |
| HeatShield resurfacing of a cracked clay tile liner | $1,200 to $2,800 |
| HeatShield Cerfractory cast-in-place liner for an unlined flue | $2,500 to $6,500 |
| Crown repair and cap work | $300 to $900 |
These are estimated ranges, not quotes. The written estimate sets the final price, and the free estimate includes the Level 2 camera inspection and the photo report. Nothing is recommended without camera evidence you can see yourself. Call (866) 589-6152 for an exact quote. Estimates are free.
Serving Huntington, IN – Our Local Coverage Area
We serve Huntington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in Huntington
Yes, that’s what cast-in-place HeatShield is made for. Brick condition has to pass a camera check first: if mortar joints are sound and the brick isn’t spalling, the liner can be poured directly against the flue walls. If the outer wythe is loosening, that gets corrected first.
Usually because the flue is oversized for the stove. Coal-era flues are larger than a modern wood appliance needs, the flue gas cools before it reaches the top, and creosote condenses. A cast-in-place liner sized to the stove solves it. Call (866) 589-6152 to get it measured.
It does, provided water is kept out of the brick. The liner itself handles the temperature swings, but a failed crown or missing cap lets freeze-thaw water crack the surface and spall the brick behind it. Crown repair and capping usually go in with the liner work. Call (866) 589-6152 for a free estimate.
A Level 1 is a visual check of what’s accessible. A Level 2 adds a camera run of the flue, and that’s the one that tells us whether a HeatShield liner can go in. Every HeatShield estimate here starts with a Level 2.
Yes. Conversions are common in Huntington’s pre-1950 housing stock, and a flue that once vented a coal furnace or an older insert usually needs a liner sized to the current appliance. That’s a routine install, not a special case.
Service Areas Near Huntington
We book HeatShield work and chimney cleaning across Huntington County and the surrounding towns, including Ossian (Ossian), Columbia City (Columbia City), Fort Wayne, New Haven and Huntertown.
Book Your HeatShield Service in Huntington Today
If your chimney is unlined, oversized, or due for a sweep, we’ll come out, sweep it, run a Level 2 camera inspection, and give you a written estimate before anything is booked. Call (866) 589-6152. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Written by the team at Fort Wayne Chimney Sweep.